Comfort

• Rear head restraint control: 3 rear seat head restraints
• Front split-bench seat: A split-bench seat allows the driver's portion of the seat to move independently of the passengers.
• Seating capacity: 6
• 60-40 folding rear seat: The rear seat seatback is split, allowing one or both sides to be folded down.
• Cabback insulator: The inside rear of the cab is trimmed to cover exposed metal.
• Cabin air filter: A system that filters the air before it enters the passenger compartment of the vehicle.
• Rear seatback upholstery: Carpet rear seatback upholstery
• Interior accents: Chrome interior accents
• Headliner material: Cloth headliner material
• Manual reclining driver seat: The seatback angle is manually adjustable.
• Driver seat direction: Driver seat with 4-way directional controls
• Rear seats fixed or removable: Fixed rear seats
• Fold-up rear seat cushion: The seat cushion folds up against the seatback.
• Passenger seat direction: Front passenger seat with 4-way directional controls
• Front seat center armrest: A single center armrest divides the front seating positions.
• Full floor coverage: The entire passenger compartment floor is covered with flooring material.
• Headliner coverage: Full headliner coverage
• Full floor coverage: The entire passenger compartment floor is covered with flooring material.
• Height adjustable front seat head restraints: The head restraint(s) can be adjusted up or down.
• Height adjustable rear seat head restraints: The head restraint(s) can be adjusted up or down.
• Lightly tinted windows: The vehicle's glass is lightly tinted.
• Manual air conditioning: The air conditioning requires manual selection of operation mode, temperature and fan speed.
• Front head restraint control: Manual front seat head restraint control
• Rear head restraint control: Manual rear seat head restraint control
• Manual telescopic steering wheel: The distance of the steering wheel from the driver is manually adjustable.
• Manual tilt steering wheel: The angle of the steering wheel is adjustable manually.
• Manual reclining passenger seat: The seatback angle is manually adjustable.
• Rear underseat ducts: Rear underseat ducts direct HVAC airflow to the rear passenger compartment from under the front seats.
• Front split-bench seat: A split-bench seat allows the driver's portion of the seat to move independently of the passengers.
• Split-bench rear seat: The rear bench cushion is split in half allowing one side to be folded independently of the other.
• Gearshifter material: Urethane gear shifter material
• Steering wheel material: Urethane steering wheel
• Manual air conditioning: The air conditioning requires manual selection of operation mode, temperature and fan speed.

Convenience

• 3 12V power outlets: Multiple 12-volt DC power outlets are provided.
• Number of beverage holders: 6 beverage holders
• Ambient interior lighting: Indirect illumination that highlights elements of the interior.
• Battery charge warning: A message, or specific light illuminates to indicate the vehicle's charging system is not producing acceptable levels.
• Compass: A display showing the direction the vehicle is traveling - on a global scale.
• Day-night rear view mirror: An interior, rear-view mirror that has a manually operated switch that adjusts the mirror slightly, up or down, to reduce glare from traffic at night.
• Door ajar warning
• Passenger door bin: The inner door panel has an integrated storage bin.
• Capless fuel filler: A spring-loaded flap replaces the traditional screw-in style gas cap.
• Exterior temp display: Displays the temperature of the ambient air outside the vehicle.
• Rear windshield: Fixed rear windshield
• Second-row windows: Fixed second-row windows
• Front beverage holder(s): An area is provided to securely hold beverages.
• Rear seat direction: Front facing rear seat
• Clock: In-radio display clock
• Low fuel warning: A message, or specific light illuminates to indicate the vehicle will run out of fuel soon, and refilling the tank is required.
• Door locks: Manual door locks
• Manual first-row side windows: The first-row of glass on the side of the vehicle can be raised and lowered manually by hand crank.
• Manually folding passenger side door mirror: Manually folding exterior mirrors can pivot on a joint to bring the mirror housing closer to the vehicle body.
• Manual tailgate/rear door lock: The tailgate/rear door lock is operated by key only.
• Oil pressure gage
• Oil pressure warning
• Passenger vanity mirror: The visor has a mirror incorporated into its design.
• Rear beverage holder(s): An area is provided to securely hold beverages.
• Rear door bins: The inner door panels have integrated storage bins.
• Reverse opening left rear passenger door: A reverse opening rear door is hinged at the rear and opens in the opposite direction of a traditional door.
• Reverse opening right rear passenger door: A reverse opening rear door is hinged at the rear and opens in the opposite direction of a traditional door.
• Service interval indicator: A message, or specific light illuminates to indicate the vehicle needs to be taken in for routine servicing (oil change).
• Glove box: Standard glove box
• Tachometer
• Rear cargo door: Tailgate
• Easy lift tailgate: The vehicle is equipped with a mechanism which reduces the effort required to close the tailgate.
• Easy lower tailgate: Once manually unlatched, the tailgate falls in a controlled manner to the open position.
• Trip odometer: A trip odometer counts the miles or kilometers the vehicle travels and can be reset by the driver.
• Variable IP lighting: The intensity of the instrument panel lighting can be adjusted manually.
• Variable intermittent front windshield wipers: The vehicle's front wiper system has low and high speeds, as well as a variable intermittent setting to change the pause length between wipes.
• Voltmeter

Exterior and Appearance

• Steel wheels: Basic steel wheels are stamped from sheet metal and are designed to accommodate full wheel covers.
• Front tow hooks: Front bumper tow hooks are large, easily visible hooks that are attached to the exterior of the vehicle's bumper.
• Number of doors: 4 doors
• Active grille shutters: An active grille shutter can automatically open or close the grille opening.
• Aluminum body panels: Aluminum body panels are found on the vehicle's exterior.
• Door handle material: Black door handles
• Door mirror style: Black door mirrors
• Bumpers front: Black front bumper
• Bumper rub strip front: Black front bumper rub strip
• Grille style: Black grille
• Bumpers rear: Black rear bumper
• Window Trim: Black side window trim
• Class IV rating: A trailer hitch rated to safely tow weights up to approximately 12,000 lbs. (Weight Distributing) / 10,000 lbs. (Weight Carrying).
• Spare tire mounted under body with crankdown: The spare tire stores beneath the vehicle in a crankdown carrier.
• Full-size spare tire: A full-size spare tire will match or closely duplicate the specifications of the running tires.
• Metallic paint: Metallic paint is a base/clear paint containing small metallic flakes that reflect light and make the finish sparkle.
• Special paint: Monotone paint
• All-terrain tires: All-terrain tires are designed for trucks, primarily 4x4 models, for both highway and off-road use over a wide variety of surfaces. They are identifiable by a deeper and wider tread design.
• Bed-rail protectors: The top of each side of the pickup box is covered in a material designed to prevent damage to the pickup box while loading/unloading cargo.
• Rear step bumper: A rear bumper with an adequate surface to stand on, that is strong enough to support the weight of a person without causing damage to the bumper. Usually has a protective covering to prevent damage to the finish.
• Regular style pickup box: The side panels of a regular style box are flush with the cab of the truck. The rear wheel wells are contained in the box and are not protruding from the side.
• Door mirror type: Standard style side mirrors
• Trailer hitch: A trailer hitch is the main structure that is attached to the rear of the vehicle, allowing the vehicle to be used for towing.
• Trailer sway control: A computer-controlled system used to automatically counteract trailer sway. When the computer senses the vehicle has left the driver's intended path, it will automatically apply select brakes to regain control and restore the intended path of the vehicle and trailer.
• Trailer towing capability: Trailer towing is approved to specific limits, depending on equipment, as specified in the owner's guide.
• Wiring harness: The trailer wiring harness is the electrical connection required to operate the trailer's running lights and brake lights. Some harnesses may include a connection for the trailer's auxiliary brakes.
• Wheel covers: Wheel hub covers

Fuel Economy and Emissions

• Fuel economy (city/highway/combined): 17/23/19 MPG
• Fuel economy (city/highway/combined): 18/23/20 MPG
• Emissions: LEV3-ULEV70 emissions
• Emissions tiers: Tier 2 Bin 4 emissions

In-car Entertainment

• First-row display screen: One or more screens are located in the vehicle's first row of seating.
• LCD primary display size: 4.2 inch primary LCD display
• Speakers number: 6 speakers
• Radio: AM/FM
• Auxiliary input jack: Any means of input that allows audio to flow from, and be controlled by, an external device through the vehicle's primary audio system. The most common forms of auxiliary audio input are: RCA or a 3.5 mm jack.
• Antenna: Fixed audio antenna
• Seek scan
• Speakers: Standard grade speakers

Powertrain and Mechanical

• Steering type number of wheels: 2-wheel steering system
• Displacement: 2.7 L
• Horsepower: 325 HP @5750 RPM
• Horsepower: 385 HP @5750 RPM
• Valves per cylinder: 4
• Alternator: The alternator is an electromagnetic device that converts mechanical energy into electrical energy.
• Automatic locking 4WD wheel hubs: The spring-loaded hub automatically engages on the fly when the transfer case is shifted from 2-wheel drive into 4-wheel drive. The application of torque to the axle causes the mechanism inside the hub to slide in and lock.
• Battery run down protection: Battery run-down protection automatically turns off interior lights and accessory power after a set time period, or when the battery power level reaches a predetermined point, in order to prevent excessive power drain on the battery.
• Double wishbone front suspension: This independent front suspension uses wishbone shaped upper and lower arms to locate the front wheels. Camber, the degree to which the wheels tilt in and out, can be precisely controlled.
• Electric power-assisted steering: An electric power-assisted steering system replaces the traditional hydraulic system with a dedicated electric motor and sophisticated electronics.
• Electronic parking brake: The parking brake can be engaged electronically.
• Electronic transfer case shift: 4-wheel drive is engaged electronically, using convenient button or switch controls.
• Four channel ABS brakes: Four channel ABS monitors and operates on each wheel individually.
• 4-wheel drive: Power is delivered to all four wheels.
• Front and rear ventilated disc brakes: The superior braking characteristics of 4-wheel disc brakes are augmented by incorporating channels, or vents, to promote air circulation. This provides better heat dissipation for cooler operation to maximize braking effectiveness.
• Front anti-roll bar: An anti-roll bar, also called anti-sway or stabilizer bar, is a transversely mounted link connecting the right and left sides of the suspension. Body roll or individual wheel movement causes the bar to twist, adding its own spring rate to that of the vehicle's springs to help reduce body roll.
• Front coil springs: A spiral-shaped spring that can be compressed or extended without permanent deformation.
• Heavy-duty rear shock absorbers: A shock absorber, also known as a damper, is a cylindrical device that prevents a vehicle's springs from continually bouncing up and down. Energy caused by axle motion is converted into heat, dissipating the energy through hydraulic fluid before it reaches the vehicle body. Hydraulic shock absorbers automatically adapt themselves to the severity of the road shock. Heavy-duty shock absorbers are upgraded to handle greater loads than normal driving. They may be specified with certain options or option packages.
• Powertrain type: ICE
• Independent front suspension: Independent front suspension allows either wheel to track over road imperfections with minimal effect on the opposite wheel.
• Battery type: Lead acid battery
• Leaf spring rear suspension: Leaf springs consist of a series of flat bars assembled parallel to the vehicle's sides which resist load inputs by bending.
• 4-wheel drive: Power is delivered to all four wheels.
• Rack-pinion steering: Rack-and-pinion steering is a simple and direct system that uses a gear (pinion) meshing with a toothed bar (rack) to directly actuate the steering linkage.
• Rear leaf springs : A flat, horizontal leaf design resists load inputs by bending.
• Fuel Type: Regular Unleaded
• Regular grade rear springs: Springs are an integral part of a vehicle's suspension system. They control motions and absorb impacts caused by tires passing over uneven road surfaces to reduce the effect on the vehicle body and spreading the weight of a load more widely over the vehicle's chassis.
• Rigid axle rear suspension: A simple non-independent suspension consisting of a rigid transverse member with wheel hubs that are solidly bolted to it. The axle can be attached to the vehicle body by leaf springs or by a combination of suspension arms and links.
• Spark ignition system: Contemporary ignition systems provide a high level of spark energy to ensure ignition under a wide variety of operating conditions
• Speed sensitive power steering: Speed sensing steering governs the amount of power assist inversely proportional to speed. The system provides greater assist when the vehicle is moving slowly, decreasing assist as speed increases.
• Stainless steel exhaust system: Stainless steel construction is used for the exhaust system.
• Regular ride suspension: A regular ride suspension provides riding comfort in typical driving situations.

Safety and Security

• Seatbelt pretensioners number: 2 seatbelt pre-tensioners
• 4-wheel ABS brakes: 4-wheel anti-lock brakes use computer-controlled sensors to continuously monitor the rotational speed of each wheel. When impending wheel lockup is detected the computer signals the hydraulic system to pump the brakes more quickly than human reflexes permit.
• 4 wheel disc brakes: 4-wheel disc brakes consist of a disc at each wheel that rotates at wheel speed, straddled by a caliper that squeezes the disc (rotor) with friction pads to provide braking.
• 6 airbags: Airbags are designed to cushion the occupants' impact and therefore reduce the possibility of serious injury in the event of a crash.
• Reflector headlamps: Durable composite, or polycarbonate, headlamp units incorporate efficient optics for excellent lighting. Most modern units focus light using multi-reflectors rather than the lens.
• Airbag occupancy sensor: Determines if a seat is being used, either by weight and/or occupancy position sensors within the seat. These factors help to determine which airbags should and should not inflate, and the intensity with which they should deploy, in the event of a collision.
• Analog instrumentation display: The majority of the instrument cluster gauges are a traditional analog style or are a digital representation of analog gauges and their movement.
• Auto on/off headlamp control: A sensor controls the vehicle lamps, turning on or off all the lights, including the headlights at full power, depending on ambient light conditions.
• Brake assist: Brake assist senses panic braking from the speed of the brake pedal's travel and applies all available power brake boost.
• Daytime Running Light (DRL) preference setting: The driver can set the Daytime Running Lights (DRL) to come on, or stay off, depending on their preference.
• Daytime running lights: Daytime running lights provide headlamp illumination as soon as the vehicle is started.
• Delay-off headlamps: When the vehicle is turned off the headlamps automatically turn off after a preset time delay.
• Convex spotter driver side door mirror: A separate mirror in addition to the standard driver side mirror. It has a slight spherical dome surface, which offers a larger field of view.
• Driver front impact airbag: Airbags are designed to cushion the occupants' impact and therefore reduce the possibility of serious injury in the event of a crash.
• Fade dome light: A fade dome light remains on for several seconds after the door(s) have been shut, then slowly begins to dim until it has shut itself off.
• Height adjustable front seatbelts: The upper anchor point of the outboard front seats can be raised or lowered manually.
• Front seatbelt pretensioners: Pyrotechnic retractors quickly remove slack from the safety belts in a crash exceeding a preset level of severity.
• Halogen beam headlamps: Halogen headlamps are standard on most vehicles. They produce a bright white light.
• Center high mounted stop light: The auxiliary brake light (CHMSL) is located in a center position at the rear of the vehicle, higher than traditional brake lamps.
• Hill hold control: When starting from an incline position, the vehicle automatically applies brake force to prevent itself from rolling back.
• Multiple enclosed headlamps: The headlamp system contains separate bulbs for the high and low beams. Both are located in the same housing behind a shatter-resistant transparent cover.
• Passenger front impact airbag: Airbags are designed to cushion the occupants impact and therefore reduce the possibility of serious injury in the event of a crash.
• Pickup box cargo light: A cargo box light shines down into the pickup box to assist night time loading and unloading.
• 3-point rear center seatbelt: A 3-point seatbelt offers enhanced center occupant protection by providing a belt that crosses the lap and the chest.
• Curtain first and second row overhead airbags: Airbags are designed to cushion the occupants' impact and therefore reduce the possibility of serious injury in the event of a crash.
• Seat mounted driver side impact airbag: Airbags are designed to cushion the occupants' impact and therefore reduce the possibility of serious injury in the event of a crash.
• Seat mounted passenger side impact airbag: Airbags are designed to cushion the occupants' impact and therefore reduce the possibility of serious injury in the event of a crash.
• Ignition immobilizer: Ignition immobilizer is a passive means of security. It consists of a transmitter embedded within the ignition key and a sensor located in the vehicle. These two circuits must be present, and must recognize each other before the vehicle will start.
• Low tire air pressure warning (tire specific): A message, or specific light illuminates to indicate exactly which tire is under inflated or will display the exact pressure in each tire. Some systems also monitor the spare tire.